How to Fix Wifi Doesn’t Have a Valid IP Configuration


If you don’t want to deal with wires and you want to relocate your laptop to a different area, a WiFi network is a perfect option.

Some Windows 10 users have complained that the WiFi doesn’t have a valid IP configuration problem message appears when they try to connect to the Internet over WiFi.

When troubleshooting an inactive internet connection in Windows 10, do you continually getting the error message “Wi-Fi doesn’t have a correct IP configuration?” When your PC is unable to obtain a working IP (Internet Protocol) address over Wi-Fi, this occurs. An IP-related problem may also occur with Ethernet.

Variations of the Wifi Doesn’t Have a Valid IP Configuration Error –


VLAN Has No Valid IP Configuration Error. The WiFi has no valid IP configuration error can prohibit you from accessing the internet. When it comes to the errors like this one, here are some of the most typical ones –

The IP address is Invalid.

The new Windows 10 operating system Antivirus software or security settings may be at blame. Disabling your antivirus should solve the problem.

No IP address Configuration is Available for Windows 10 –

Toshiba, ASUS, Lenovo, HP, and ASUS all have Windows 10 models, as does Dell, which has a Surface Pro 4 model. It can occur on practically any device, and your drivers are almost always to blame. Make sure your drivers are up to date.

Unidentified Network, No Internet Connection, and No Internet Security –

WiFi doesn’t have a correct IP configuration. There are a number of different ways to encounter this problem, but the answers provided here should help you resolve any and all of them.

What Causes an Invalid IP Address on My Computer?

For internet connection, a number of criteria must function successfully, including the IP Address. This means that any minor problem can prevent a machine from accessing the internet.

Here are a few reasons why your IP configuration may be inaccurate or invalid –

1. The network adapter has a problem.
2. Service has yet to be activated on the network
3. Drivers for outdated network adapters
Incorrect set-up of the router

It Doesn’t Have a Valid IP Address Configuration, So How do You Fix it?

This list of troubleshooting tips should be helpful if the first step of restarting your computer does not resolve your issue. This error can be corrected by using the techniques listed below.

Method 1 – Router Restart 

Error message “Wi-Fi doesn’t have a proper IP setup” is most often caused by a faulty router, which can happen to anyone. Restarting your router is the solution.


Start by disabling the router’s internet connection. Then, turn it back on and wait for at least ten seconds. Make that your computer is able to connect to the internet once it has re-established its Wi-Fi connection.

Method 2 – Reset Wireless Adapter

It is possible to fix connectivity troubles in Windows 10 by disabling and then re-enabling your PC’s wireless network adapter

Step 1 – To launch the Run window, press Windows+R.

Step 2 – Click OK after typing ncpa.cpl.

Step 3 – Right-click the wireless network device and select Disable in the Network and Sharing Center window that appears.

Step 4 – Wait up to 10 seconds before continuing.

Step 5 – Right-click on the Wi-Fi adaptor and pick Enable from the drop down menu.

Step 6 – Renewing Your PC’s IP Lease is the last step in the process.

Method 3 – To Force Your Computer to Renew its IP Lease

Try restarting the router or deactivating and re-enabling the wireless network interface. Windows PowerShell commands can be used to do this.

Step 1 – When you press Windows+X, choose Windows PowerShell.

Step 2 – Press the Enter key to run the instructions below one after the other –

ipconfig /release

ipconfig /flushdns (optional)

ipconfig /renew

Step 3 – End your time with Windows PowerShell by closing the programme.

Method 4 – TCP/IP Stack Reset 

Resetting your PC’s TCP/IP stack if renewing the IP lease didn’t help In order to accomplish so, you’ll need to run a few command lines from an elevated Windows PowerShell terminal.

Step 1 – The first step is to press Windows+X and pick PowerShell (Admin).

Step 2 – Press Enter as you type each command below one at a time –

netsh winsock reset catalog

netsh int ip reset

Afterward, exit the Command Prompt and restart the machine. If the error was caused by a faulty TCP/IP stack, you should be able to get online without any issues.

Method 5 – A different Wireless Network Adapter Installment 

In order to fix this error message, you must uninstall and reinstall the wireless network adapter on your computer. That should rule out the possibility of a compromised driver.

Step 1 – Select Device Manager by pressing Windows+X.

Step 2 – Expand network adapters in step two.

Step 3 – Disable your wireless network adapter by right-clicking on it and selecting Disable device.

Step 4 – Select “Yes” in step four.

Step 5 – Uninstalling the wireless network adapter is the next step.

Step 6 – Restart your computer, and the wireless network adapter should be reinstalled automatically.

NOTE – Open Device Manager again and select Scan for hardware changes by right-clicking your PC’s name at the top if the wireless network adaptor is not detected and installed after restarting.

Method 6 – As a Next Resort, You Can Update Your Wireless Network Adapter.

In order to fix the problem, you need to upgrade the wireless network adapter’s driver. Although Windows 10 comes with a generic driver, it’s a good idea to go to the manufacturer’s website and get the most recent version.

An active internet connection is obviously required for that. Just execute the driver setup file and follow the on-screen directions to update the wireless network adapter after downloading and transferring it.

Use the IP Address Auto-Generation option to get the IP address. Your PC’s wireless adapter should have an IP address and DNS settings that are unique to your network. If this is the case, you should go back to having them delivered to you on a regular basis.

Step 1 – To launch the Run window, press Windows+R. Then click OK after typing ncpa.cpl.

Step 2 – Doing so will bring up a context menu where you may access the adapter’s properties.

Step 3 – Click on Internet Protocol Version 4 (TCP/IPv4) Properties in the Networking tab.

Step 4 – After you’ve selected Obtain an IP address and Obtain a DNS server address, click on the radio options next to them.

Step 5 – In order to configure TCP/IPv6 Properties, follow the same steps as for TCP/IPv4.

Method 8 – Change the Router’s SSID and Password to Secure Your Network.

Change the SSID and password of your router to fix the “Wi-Fi doesn’t have a proper IP configuration” issue. For this, you’ll need to access the router’s configuration page.

NOTE – To access the router’s settings, you’ll need the gateway IP address, username, and password. The information is usually printed on a label that can be found on the router itself.

Step 1 – A new browser window will open with the IP address of the gateway already typed in.

Step 2 – Enter the router’s username and password to get access.

Step 3 – Change the SSID and password in the router’s settings. Then, press the save button to finalise your changes.

Once you’ve done so, you’ll need to change the SSID and password on your PC’s connection to the router. Also, make sure any devices connected to the network have the latest firmware installed.

Method 9 – Use the Network Adapter Troubleshooter

It’s time to check your Wi-Fi connection again using Windows 10’s network troubleshooter now that you’ve completed a significant number of fixes.

Step 1 – In the first step, choose Network Connections by pressing Windows+X.

Step 2 – Select the Network troubleshooter in step 2.

Step 3 – Select Wi-Fi in the third step. Follow the on-screen instructions after you click Next to fix any problems.

Keep moving on until you get through this error message: “Wi-Fi doesn’t have a correct IP configuration.”

Method 10 – Resetting Your PC’s Network Settings 

It’s time to clear the network settings on your PC. In theory, this should restore all network-related settings to their original defaults, removing any wrong or corrupt configurations that may have been in place previously.

Step 1 – In the first step, choose Network Connections by pressing Windows+X.

Step 2 – Select the option to reset the network.

Step 3 – Afterwards, click the Reset button.

In most cases, the “WiFi doesn’t have a valid IP configuration” error will go away once you’ve reset the network settings and reconnected to Wi-Fi.

Method 11 – Check if Wi-Fi IP Configuration Is Valid 

To fix “Wi-Fi doesn’t have a valid IP configuration,” try rebooting your router, wiping your wireless network adapter, or renewing your IP lease. However, if the problem persists for a long period of time, we recommend that you try some of the more advanced remedies or contact any expert.

Some Frequently Asked Questions and Answers on This Topic

Many people have concerns about their computer’s WiFi connection. A few of these issues have been addressed in our work. Let me know what you think once you’ve seen them.

What’s Wrong With My Internet Connection?

Problems with the network driver can cause your laptop’s Wi-Fi to disconnect and reconnect frequently. Try updating your driver to see if it fixes this problem. If the problem persists, make sure your Wi-Fi signal is as strong as it can be.

The placement of your router will also have an impact on the Wi-signal Fi’s strength. An unstable internet connection can be caused by a lack of Wi-Fi strength in your area.

To fix this problem, move your device closer to the router. This problem can be resolved by connecting a LAN cable or using a repeater.

How Can I Make My Wi-Fi Connection Stable?

In the event that your Wi-Fi connection is not stable, here are several ways to fix it –

1. Extend the range of your Wi-Fi network with a Wi-Fi extender.
2. Use a LAN cable to connect to the internet.
3. Update your router’s software.
Disable any router-connected devices that aren’t absolutely necessary.
Place the router so that it can be seen from every room in the house.


You can’t connect your PC to a wireless network that doesn’t have a correct IP setup.

Driver troubles are the most common cause, but we’ll look at everything else. To help you out, we’ve put together a list of troubleshooting tips in this post.